FALOART

HomeGuides

Water vapor fireplace care: which water, how often to refill and how to keep it clean

Filtered or purified water, 18 to 25 hours on a full tank, access for refilling and the parts that wear: the day-to-day running of a water vapor fireplace.

Fill a water vapor fireplace with filtered or purified water, top it up when the tank runs low, and keep the water path clean. On the L Series a full tank runs for 18 to 25 hours, so how often you refill depends on how many hours a day the fire is on.

Which water

Use filtered or purified water, nothing else. The flame is made of the water itself: an ultrasonic atomizer turns it into a fine mist, and whatever is dissolved in the water goes through the atomizer too. The L Series also has a filter in the water path, which keeps the tank clean and the mist fine; it works alongside clean water, not instead of it.

If you are not sure whether your local water counts, ask us before the first fill.

How often to refill

Divide the running time of a full tank by the hours you use the fire each day. On the L Series that is 18 to 25 hours, so a fire on for 5 hours every evening needs filling about every 3 to 5 evenings.

The range depends on the unit and how it is used; ask us what running time to expect for your length and settings.

Our advanced water vapor insert has its own keys to fill and drain the water, and a 0 to 9 hour timer, so the fire switches off on its own at the end of the evening instead of running the tank down overnight.

Plan the access before the finish

Refilling and cleaning need a way in. Leave access to the tank once the wall, the cabinet or the stone is finished, and agree with the designer where it sits. Around the unit, use damp-proof materials and avoid reflective material above it. Our water vapor fireplace guide covers placing the unit, and the opening checklist the points to agree before the opening is built.

Keeping it clean

Everything in the L Series that touches water is 304 stainless steel, down to the screws, finished in a soft-touch paint, so the parts in contact with water do not rust. That leaves three things to look after:

  • The water: clean, filtered or purified, every fill
  • The filter in the water path
  • The atomizer and the water hoses

Ask us for the cleaning routine and the filter change interval in the manual for your model.

Parts that can be replaced

Atomizers and water hoses for water vapor fireplaces are kept as spare parts, along with remote controls, main boards and fans. If the mist weakens or the flame changes, send us a photo or a short video of the unit running.

For hotels, show homes and rentals

  • Put refilling on the housekeeping list, with the hours the fire runs each day
  • Keep filtered or purified water on site, not only in the plant room
  • Where the unit has a timer, use it, so no one has to remember to switch the fire off
  • Ask us which spare atomizers and hoses to hold for the number of units you run

Planning a project or a showroom?

Send the space photos, opening sizes and quantities. We reply with models and a quotation.